NuFence
Acrylic Flat Finish Fence Paint
Acrylic Flat Fence Coating
NuFence is an acrylic flat finish fence paint which provides excellent covering power, low splatter and simple water clean-up
for rough sawn timber and picket fences. NuFence is readily available in a select range of pre-tinted contemporary colours;
Monument, Black and Woodland Grey with other colours available upon request.
The unique nanotechnology formulation properties substantially lower surface friction to reduce dirt pick up and retention, providing excellent long-term self-cleanability and exterior durability.
NuFence Features & Benefits:
- Waterbased
- Low VOC and Low Odour
- Hard-wearing
- Excellent adhesion
- Easy application by brush, roller or spray
- Easy cleaning
- No primer or undercoat required
Appearance:
Colour tinted viscous liquid
pH:
pH: 8.5 Per Cent Volatiles (VOC): < 5% Solubility: In Water Minimum Film Forming Temperature: 10°C.
Application:
Brush, Roller or Airless Spray
Solubility:
Water
Film Forming Temperature:
10°C
Coats Required:
2 Coats
Recoat Time:
2 Hours
Full Cure:
24 Hours
VOC Levels:
Low
Colours:
3 Colours
Flammability:
Non-Flammable
Gloss Levels:
Matt
Ambient Application Temperature:
10°C – 30°C
Coverage Rate:
8 to 10m²/L Note: Coverage will depend on the porosity and roughness of the surface. To maximise performance do not over spread.
Important Notice
The information given in this data sheet is based on many years of experience and is correct to the best of our knowledge. However, as the use of our product is beyond our control we can only be responsible for the quality of our product at the time of dispatch. For additional information about specifications or application please contact our company. As this information is of a general nature we cannot assume responsibility for individual use.