fbpx

PaveCoat

pavecoat paint nutech

 

Australia’s Number 1 Concrete Sealer

PaveCoat is a high performance, solvent-based acrylic sealer recommended for a wide variety of functional, decorative and protective concrete applications. PaveCoat seals, colours and protects concrete to provide a durable surface ideal for pedestrian and light vehicle traffic, making it an economical and long-lasting choice. PaveCoat provides an attractive finish for new and old concrete and comes in gloss as standard, with high gloss and matt finishes available upon request.

Applications

PaveCoat concrete sealer is manufactured from acrylic polymer resin and is stabilised for all types of concrete including:

  • Paving
  • Driveways
  • Factories
  • Workshop floors
  • Service Stations
  • Tilt slab construction
  • Asbestos and cement sheeting
  • Slate flooring
  • Concrete roof tiles.

PaveCoat clear and colours are recommended for:

  • Plain concrete
  • Pattern paving
  • Stamped impression paving
  • Stencil paving
  • Spray on finish paving.

PaveCoat is highly durable and resistant to oil and most chemicals.
For improved resistance to petrochemicals refer to PaveCoat Petrol Resistant.

Features

  • Available in clear and 46 standard colours
  • Can be custom colour matched upon request
  • Excellent UV light resistance
  • Resistant to fading
  • Non-yellowing
  • Resistant to oil and grease

Application Guide

For detailed substrate preparation and application steps, please download the full application guide.

Preparation

Prepare surfaces using Nu-EcoSafe Etch and Nu-EcoSafe Ultra Etch, and pressure wash prior to PaveCoat application.

Equipment

Roller or Brush.

Conditions

10°C to 30°C ambient, dry conditions.
Do not apply if; Rain is likely within 12 hours, it is late in the day or early in the morning. Failure to observe these directions can result in coating damage and surface clouding.

Application

• Thin in accordance with the surface profile.
• Apply 2 even coats observing recoat and drying times.

Warnings

Do not park vehicles on sealed concrete for a minimum of 7 days.

PaveCoat
Quick Reference

Suitable Surfaces

Concrete Slabs

Appearance:

Clear colourless or coloured viscous liquid

Solubility:

PaveCoat Thinners

Film Forming Temperature:

10°C

Dry Film Thickness:

65 microns

Coats Required:

2 Coats

Recoat Time:

2 Hours

Touch Dry:

30 Minutes

Full Cure:

7 Days

Colours:

46 Standard Colours

Flammability:

Highly Flammable

Gloss Levels:

Gloss, High Gloss and Matt

Ambient Application Temperature:

10°C - 30°C

Coverage Rate:

4 - 6 m2/L

Properties

Suitable for Vehicles

Clear Finish

Coloured Finish

Solvent Based

In The Blog:

Related Products:

Download PaveCoat Application GuideDownload PaveCoat TDSDownload PaveCoat SDS
Important Notice

The information given in this data sheet is based on many years experience and is correct to the best of our knowledge. However as the use of our product is beyond our control we can only be responsible for the quality of our product at the time of dispatch. For additional information about specifications or application please contact our company. As this information is of a general nature we cannot assume responsibility for individual use.

Call Now