EPiC Industrial Enamel

High Gloss Enamel Surface Coating

Nutech Industrial Enamel is a modified single pack urethane enamel made in a high gloss finish. It can be applied to a variety of surfaces including Concrete, Timber and Metal Surfaces that have been primed with a suitable Metal Primer. EPiC Industrial Enamel is for general purpose use.


Nutech EPiC Industrial Enamel has excellent durability for a single pack coating. It has very good corrosive and abrasive properties. It is hard-wearing when cured and has excellent Gloss and Colour retention.

Suitable Substrates

  • Concrete
  • Stainless Steel
  • Blasted Steel
  • Mild Steel
  • Aluminium
  • Galvanised Iron
  • Timber

Click Here to find out where to buy this product.

Application Guide


All surfaces must be free from Rust, Oil, Grease, and all other surface contamination. Bare concrete should be acid etched to increase surface porosity.


Brush, roller, spray. Stir thoroughly before use. Use a good quality brush and a good quality solvent resistant sleeve. Spray application will depend on the type of finish required.


For spray application thin 10% - 15% Nutech Mineral Turps. Do not thin for brush or roll applications. For bare concrete thin the first coat by 20% - 25% using Nutech Mineral Turps.

Drying and Recoating

Industrial Enamel will be touch dry after 25mins (at 25°C) and can be recoated within 4 hours or after 24 hours.

A hard cure will be achieved after 7 days.

Clean Up

Nutech Mineral Turps

Safety Precautions

Make sure there is good air flow and ventilation before applying this coating.

EPiC Industrial Enamel
Quick Reference


White and coloured liquid

Film Forming Temperature:


Dry Film Thickness:

25 microns

Coats Required:

2 Coats

Recoat Time:

2 - 4 Hours

Touch Dry:

25 Minutes (at 25°C)

Full Cure:

7 Days

Ambient Application Temperature:

10 °C - 30°C

Coverage Rate:

8 - 10 m2/L m2/L


Coloured Finish


Industrial Grade

Interior Use Only

Solvent Based

Related Products:

Download EPiC Industrial Enamel TDSDownload EPiC Industrial Enamel SDS
Important Notice

The information given in this data sheet is based on many years experience and is correct to the best of our knowledge. However as the use of our product is beyond our control we can only be responsible for the quality of our product at the time of dispatch. For additional information about specifications or application please contact our company. As this information is of a general nature we cannot assume responsibility for individual use.