PaveCoat Petrol Resistant

For surfaces exposed to petrol and mild solvents

PaveCoat Petrol Resistant is a high performance, penetrating, solvent-based acrylic sealer with excellent chemical resistance to petroleum fuels and oils. PaveCoat Petrol Resistant is recommended for vehicle workshops, fuel stations or factory floors exposed to most petrochemicals. PaveCoat Petrol Resistant seals, colours and protects concrete to provide a durable surface ideal for these applications, providing an attractive finish for new and old concrete.

Typical Uses

  • Service Stations
  • WorkShops
  • Factory Floors
  • Driveways
  • Garage Workshop Floors
  • Automotive Pit Areas


  • Available in clear, black, light grey & earl grey with gloss as standard
  • Other colours can be made to order upon request
  • Durable and resistant to oil, grease and most petrochemicals
  • Highly durable
  • Excellent UV light resistance
  • Resistant to fading
  • Non-yellowing

Click Here to find out where to buy this product.

Application Guide

For detailed substrate preparation and application steps, please download the full application guide.


Prepare surfaces using Nu-EcoSafe Etch and Nu-EcoSafe Ultra Etch, and pressure wash prior to PaveCoat application.


Roller or Brush.


10°C to 30°C ambient, dry conditions. Do not apply if; Rain is likely within 12 hours, it is late in the day or early in the morning. Failure to observe these directions can result in coating damage and surface clouding.


• Thin in accordance with the surface profile. • Apply 2 even coats observing recoat and drying times.   DOWNLOAD CARE & MAINTENANCE BROCHURE


Do not park vehicles with hot tyres or place heavy items on newly applied PaveCoat Petrol Resistant for at least 7 days.

Do not apply PaveCoat Petrol Resistant late in the day or early in the morning. Sealer affected by moisture loses gloss and may appear milky.

Safety Precautions

Petrol Resistant PaveCoat contains flammable solvents and suitable safety precautions must be taken during handling and application.

Ensure X-5 Solvent is used for thinning and clean up.

Ensure adequate ventilation if applying in enclosed spaces.

Avoid contact with naked flames, sparks, pilot lights and other sources of ignition.

PaveCoat Petrol Resistant
Quick Reference

Suitable Surfaces

Concrete Slabs


Clear or coloured viscous liquid


X-5 Solvent

Film Forming Temperature:


Dry Film Thickness:

65 microns

Coats Required:

2 Coats

Recoat Time:

2 Hours

Touch Dry:

30 Minutes

Full Cure:

7 Days

VOC Levels:



Available in clear, black, light grey & earl grey with gloss as standard


Highly Flammable (> 70% Volatiles)

Gloss Levels:


Ambient Application Temperature:

10°C - 30°C

Coverage Rate:

4 - 6 m2/L


Clear Finish

Coloured Finish

Industrial Grade

Petrol Resistant

Solvent Based

Related Products:

Download PaveCoat Petrol Resistant TDSDownload PaveCoat Petrol Resistant SDS
Important Notice

The information given in this data sheet is based on many years experience and is correct to the best of our knowledge. However as the use of our product is beyond our control we can only be responsible for the quality of our product at the time of dispatch. For additional information about specifications or application please contact our company. As this information is of a general nature we cannot assume responsibility for individual use.